پروگرامر و دیباگر AVR-JTAG ICE

پروگرامر و دیباگر AVR-JTAG ICE

پروگرامر و دیباگر AVR-JTAG ICE

های کپی

AVR-USB Value Stabilization Emulator Features:

1 The latest version of the design, add a buffer chip (to prevent the incorrect operation of the punch firmware);

2 more 0.5A PTC fuse (to prevent short circuit from burning the computer motherboard);

3 Wide operating voltage, support 3.3v;

4 This emulator firmware can be unlimited, both upward and downward, support for AVR Studio software up to date 4.12/4.14/4.16/4.17/4.18!!!!

introduction

AVR JTAG with Atmel AVR Studio + ICCAVR or WinAVR is based on a complete set of debugging tools. JTAG chip matching supports all RISC AVER instructions with a microprocessor JTAG port. JTAG interface is a 4 IEEE 1149.1 compliant test port (tap) controller. The IEEE standards provide standard methods for connecting a test circuit (boundary scan). Atmel AVR devices have been extended to support full programming and on-chip debugging functions.

AVR JTAG emulator is used for hardware chip emulation, such as executing a single program, setting up points, etc., through hardware simulation can understand the details of the chip within the program operation. AVR JTAG emulator is mainly used to simulate the operation of the chip, but can also be programmed through the JTAG interface chip (the program into the chip).

Supported chip

Omega 128, atmega128l, atmega 16, atega162, atmega162v, atmega165v, atmega169v, atmega 169v, atmega323l, atega323l, atmega32l, atega32l, atega64, atmega64l (supports all Aber microcontrollers with JTAG port).

Emulator connected to USB port, the other received a ten-pin JTAG interface, superior performance compatibility than similar products, PC software is AVRSTUDIO, compatible 4.12/4.13/4.17/4.18 and later, the firmware can be upgraded;