مبدل دیجیتال به آنالوگ صوتی PCM5102A

1,403,000 تومان

مبدل دیجیتال به آنالوگ صوتی PCM5102A

Product Parameters

  • Module supply voltage: DC3.3V
  • Signal to noise ratio SNR: 112dB
  • Dynamic range: 112dB
  • Full-scale single-ended output: 2.1VRMS
  • Sampling frequency: 8KHz ~ 384KHz
  • Main clock frequency: 50MHz
  • Number of audio data: 16, 24, 32
  • Working environment temperature: -40 ° C ~ 85 ° C
  • Audio data format: IIS, left aligned
  • Total harmonic distortion (THD+N at -1dBFS): -93dB
  • Module size: 31.8mm*23.7mm*6.35mm, with a 3.5mm headphone holder

14 در انبار

*  پرداخت آنلاين غير فعال است - قيمتها به روز است - سفارش خود را ثيت و نهايي بفرماييد.

* پس از تاييد موجودي ، فاكنور و شماره كارت بانكي از طريق واتساپ و پيامك ارسال مي گردد

شناسه محصول: MRK48-13741 دسته: برچسب:
توضیحات

مبدل دیجیتال به آنالوگ صوتی PCM5102A

مبدل دیجیتال به آنالوگ صوتی PCM5102A

Product description

  • PCM5102A Digital-to-Analog Converter.
  • PLL Voice Module Stereo DAC Sound Card Board .
  • With 3.5mm Stereo Jack .
  • 24 Bits Digital Audio Module for Raspberry Pi.
  • PCM5102A Digital-to-Analog Converter.
  • PLL Voice Module Stereo DAC Sound Card Board .
  • With 3.5mm Stereo Jack .
  • 24 Bits Digital Audio Module for Raspberry Pi.

Product Features

The PCM5102 integrates a stereo analog-to-digital converter (DAC) for excellent dynamic performance and improved tolerance to clock jitter. With Direct PathTM charge pump technology, the PCM510xA device provides a 2.1 VRMS central ground output (designer does not need to be at the output) Connected to the DC-blocking capacitor) and an external mute circuit that is traditionally associated with a single-supply line driver.

Integrated soft muting can also be hardware muted to achieve a 120dB mute signal-to-noise ratio (SNR). Each pin of the integrated line driver supports loads as low as 1kΩ, surpassing all other charge pump-based line drivers in performance.

A high-performance integrated audio phase-locked loop (PLL) with BCK reference integrated on the device internally generates SCK, eliminating the need for a system clock (commonly referred to as the master clock) to achieve a 3-wire I2S connection and reduce System electromagnetic interference (EMI). Smart Clock Error and Power Sense Under voltage Protection feature a two-layer system that eliminates clicks and pops.

Compared to many traditional switched capacitor DAC architectures, out-of-band noise can be controlled to a low level of 20dB, reducing EMI and aliasing in downstream amplifiers/ADCs. When an error occurs in the clock and power system, the device automatically attenuates the data and starts the analog mute circuit.

Product Parameters

  • Module supply voltage: DC3.3V
  • Signal to noise ratio SNR: 112dB
  • Dynamic range: 112dB
  • Full-scale single-ended output: 2.1VRMS
  • Sampling frequency: 8KHz ~ 384KHz
  • Main clock frequency: 50MHz
  • Number of audio data: 16, 24, 32
  • Working environment temperature: -40 ° C ~ 85 ° C
  • Audio data format: IIS, left aligned
  • Total harmonic distortion (THD+N at -1dBFS): -93dB
  • Module size: 31.8mm*23.7mm*6.35mm, with a 3.5mm headphone holder
نظرات (0)
حمل و نقل و تحویل