اسپید کنترلر موتور براشلس ESC30A

اسپید کنترلر موتور براشلس ESC30A

اسپید کنترلر موتور براشلس ESC30A

دیتاشیت

Thanks for purchasing RC Timer Electronic Speed Controller (ESC). High power system for RC model can be very dangerous, so we strongly suggest you read this manual carefully. In that we have no control over the correct use, installation, application, or maintenance of our products, no liability shall be assumed nor accepted for any damages, losses or costs resulting from the use of the product.

Any claims arising from the operating, failure or malfunctioning etc. will be denied. We assume no liability for personal injury, property damage or consequential damages resulting from our product or our workmanship. As far as is legally permitted, the obligation to compensation is limited to the invoice amount of the affected product.

Specification

• Input voltage: DC 6-16.8V(2-4S Lixx)
• Running current:30A(Output: Continuous 30A, Burst 40A up to 10 Secs.)
• Size: 26mm (L) * 23mm (W) * 11mm (H).
• Weight: 32g.

Features

• Extreme low output resistance, super current endurance.
• Multiple protection features: Low-voltage cut-off protection / over-heat protection / throttle signal loss protection.
• 3 start modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircraft and helicopter.
• Throttle range can be configured to be compatible with all transmitters currently available on market.
• Smooth, linear and precise throttle response.
• Separate voltage regulator IC for microprocessor (except Pentium-6A and Pentium-10A), providing good anti-jamming capability.
• Supported motor speed (Maximum): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).

Very important: if you use banana-shape connectors on main power wires (Input wires), please connect the black wire (negative polarity) BEFORE red wire (positive polarity). So the right
sequence is: BDMP Adapter → BLACK wire of main power → RED wire of main power